Відео

Thaks for the info!! Fixed my Durango in 5 minutes after watching this video. You da man!!

Not to mention changing the oil filter on this POS. I have changed oil in a lot of vehicles and equipment in my life and this is the worst that I have ever seen.

None of my gauges work the rpm is alll the way past max the speed don’t move at all and oil and battery says 0 any ideas 03 trailblazer

Found best way just put socket in hard one and turn the socket with a pair of plyers that's easy way to remove the screw

The right side is the technical side. Thanks for othing

Question ,can't you still pop out the axle without removing the 4x4 locking cover

Hello Tim, I have '03 Ford Expedition with 4.6 motor and I have P0304 Cylinder 4 misfire but Cylinder 4 is located towards the rear side of the engine. The previous plug was not installed correctly. Would this technique along with the toolset work in this case? Please advise. Thanks

Thanks Doc, your a Boss. Clear video, no bs - my f-150 2.7 has 150K never a prob, suddenly stalled at gas station after fill. fixed it myself with your help.

Hello guys! 👏 what's it call that hose at minute 17:48 the one with the black zip tied?

My 2011 Impreza does a yearly P026 since 2022. Once replaced with a new one it runs normal again until the following year? What could be the cause of this yearly dilemma? Thanks

What about bad gas mileage

I'm facing the same issue. I have a Mitsubishi Galant 2011. After replacing the key fob battery (which was not working) the car won't start. The key fob works properly (locks/opens the doors and the trunk) but the car won't start. I really appreciate any help.

My blazer acts like it wants to shutoff when pumping gas...any ideas...

Yeppers been there . Replaced the bearing the first time which was very hard to press out 2nd Time found this video 3 years later doing both seals again going to reroute the breathing tube to my fj body

The gauge cluster sux the shift solenoid from second gear to third gear

It was very irritating when you left the key in the ignition and the beeping while trying to understand what you were staying...Very DISTRACTING>

I'm doing this as well as the bushing, and all new shocks in preperation for the new tires I have ready to be put on.

How did that hub bearing assembly work out so far

Hello brother I have a 2005 gmc Yukon Denali my reading oil pressure reading stays at 0 I have been driving the truck like that for a while I have no engine codes another thing is there is a problem with my cluster my milage is ghost and prnd123 are barley visible everything else on the cluster works other than my oil pressure gauge stuck at 0 just need some input before I start spending money on parts

Woof!!!

this is not gonna help anyone. Very few have a 5000$ snap on computer bro

I agree, but he is in Alaska. My 02 runs phenomenally, but storm yesterday on way home, and codes galore this morning after no start. Dash lights stayed on, and abs light. Figuring trash on wheel speed sensor magnets, and park indicator tab broken on shift lever. Any other ideas.

Good stuff, my right turn signal is staying on, when I turn off my car 😢

Just a tip, I assume it's quite similar but the vehicle is not an E150, 8 lugs means it's at least an E250

So I changed my valve and the pipe and it stays haves those problems

I have an 04 Malibu- I have replaced the bulbs- replaced the whole housing- replaced the pigtail wiring. Now- again I will replace the headlights after my battery and alternator were bad. It sucks

I have a 2002 Tahoe Z71 and I just performed the 2024 big brake upgrade and boy what a difference. I am now wanting to convert it to Hydroboost. I have the complete Hydroboost Setup off a 2006 Suburban. The problem I am seeing is the 2002 Power Steering pump had the EVO sensor and the 2006 does not. Will I be ok just swapping Power Steering pumps and disconnecting the EVO? I need the 2006 pump because it has multiple returns for the PS fluid. Do I need to put the EVO bypass on the 2006 Pump or just run the 2006 pump without it. Any help would be greatly appreciated.

Amazon fuel pump only lasted Four months

What happens if it’s just a little bit?

Man, this dude is long winded. Get to the point

Must be convenient having a rack.. want to know whats really hard try laying on your back and scooting underneath with no room to maneuver... 😔

Can you use seafoam as a cleaner for it?

Thanks for the information bro, it help me out brother. Thanks again

Wut the hell thought toyota tsvomas never fail

2008 rtl. Just did mine. Thanks for the heads up. Spent 240 with tax. Place price matched off internet

How do you take off the front cab of a 1987 Ford Ranger it's seems to be stuck even after removing the 6 main bolts? Where too look???

I fix My problem, tankyou bro

Thank you

Light flickering on screen because it’s an LED light. Screen recording picks it up . Thanks for the video! Super helpful!

Eair play 2 ya. Good vid. Kinda wishing I'd seen it yesterday as I bought 1 of these 2day, but tha said, think I did alright and trust the seller, but now know wha 2 be checking 4 tomorrow, and as longas I own this. So nice un, keep it up.

I just pulled the fuse every time I turned the truck off for 4 years! Your idea is better. 😂

Great video. My 2004 GMC Sierra 1500 4wd with the 5.3 L makes a groaning noise when I turn to the left. You hear it inside the cab but not outside. Any idea what that is? Thx.

I have a 2016 CRV and I just started hearing this sound 2 days ago. Didn’t even realize that it was coming from the rear passenger side until I heard it early in the morning while going down a hill at 20 miles per hour. Your video was very helpful and I’ll be getting it checked out. Thanks.

My 06 gmc sierra when in park or neutral the rpm idle to 2000k and gets stuck on it until I press the break pedal any ideas why it’s doing this and what I can do to fix it?

Well I got no ac compressor no backup lights no dome lights can't dim the dash out no gauges no radio things I have replaced and Done had dash panel rebuilt changed all the fuses there hot with power all the relays checked every ground wire in and on and under the truck replaced the bcm with a new one new batteries the truck will start right up and drive with no problem and the dash has a abs light on battery light on air bag and check engine I even changed the fuse block took the dash apart and checked the wires and ground my heater works only thing is ac compressor not turning on I can jump the relay and it will freeze you out and least it won't let me scan it no connect yes I checked all the fuses and wires on that and least but not first the Chevy dealership had no clue what it could be so yep 47 years of being a mechanic this one has me

Loosen the 1 clamp on the maf and slide the assembly apart. Makes it alot easier to service that maf

my father went to dealership for his check engine light being on they said they put a new computer in it. I told him to turn signal bulb that's all it needs for the turn signal just needs a bulb they did everything except the bulb so they said , What is this it had a leak so they apparently put a new computer in it fix the air condition and then throw in an oil change and it was still over 5000 but if that'll piss you off

they charge my father 5000.00 to fix his air conditioner , and he kept me from smashing their main window driving up on his desk

What about a volvo steering rack with the variable assist solenoid on the rack collum itself, can you replace it with a rack that does not have the assist solenoid,, and essentially just plug in the old solenoid and let it dangle (since it doesn't have a place to connect to the new rack)?

you new all along , they were going to be railroaded , your a good man